Kolink Void ATX Case
2 Working Day Delivery Time
Dimensions: 190 x 430 x 400 mm (W x H x D)
Total fans possible: 3x 120mm (Front) 2x 120mm (Roof) 1x 120mm (Rear)
Included fans: 1x 120mm RGB (Rear)
I/O-Panel: 2x USB 2.0 (internal connection), 2x USB 3.0 (internal connection), 1x Audio In/Out
THE FEATURES OF THE KOLINK VOID AT A GLANCE
- V-Shaped cut-out with infinity mirror effects and RGB lighting
- Tempered glass side panel for unobstructed view of the interior
- Designed for ATX-/Micro-ATX-/Mini-ITX motherboards
- A pre-installed 120mm fan with digitally addressable RGB lighting
- Support for radiators up to 240mm in the front
- I/O Panel with 2x USB 3.0 & 2x USB 2.0, HD Audio, RGB-LED controller
- PSU shroud with air inlets for a cleaner look
- Graphics cards up to 310 mm supported, CPU coolers up to 160 mm, PSUs up to 180 mm
KOLINK VOID: EXQUISITE DESIGN MEETS HIGH PERFORMANCE
The digitally addressable RGB-LED strips, the effect of which is heightened with Kolink's bold move to integrate a kind of infinity mirror effect into the case, can be controlled via a switch on the I/O panel. This also holds true for the rear-mounted 120mm fan that comes pre-installed. Alternatively, the strips and the fans can be hooked up and controlled using a compatible motherboard thanks to its use of a standard 3-pin (5VDG) connector. This then allows the RGB-LED button to be used as a reset button instead. The tempered glass side panel allows users to enjoy a panoramic view of the lighting used inside the Kolink Void.
Aside from the pre-installed fans, users are also free to install five more 120mm fans, three of which can be installed in the front and two more in the roof. This is where a magnetic dust filter can be found installed on the honeycomb-style mesh. The side-facing air inlets on the front and in the PSU shroud also contribute to the excellent airflow of the case. As an alternative to fans, users are free to install a 240 mm radiator in the front.
THE KOLINK VOID: MORE THAN ENOUGH SPACE FOR HARDWARE
The interior comes entirely in black, with a PSU shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDD's, using a 'drop and lock' system to secure. Alternatively, 2.5" SSD's can be installed here, or directly on top of the PSU shroud. The motherboard tray and PSU shroud both offer numerous openings for optimum cable management. Underneath the case is a removable dust filter appropriate to an ATX-form factor PSU, which can itself be up to 18 cm in length.
Graphics cards can be up to 31 cm long and CPU coolers up to 16 cm tall. Additionally, the I/O panel located at the front possesses two USB 2.0 ports as well as two USB 3.0 Type-A ports.